In these turbulent economic periods, extracting floor covering or popping out ceramic tiles placed on the walls of your home may not be a viable idea. Painting existing ceramic tiles, on the other hand, is an affordable home upgrading plan that can inject a new lease of life into your surroundings. However, you need to devote a reasonable amount of time and energy to prepare the ceramic to hold the paint. The good news is the steps to do this are uncomplicated.
Painting ceramic tiles is much more cost-effective than substituting existing tiles with fresh tiles. Substantial amounts of money need to be invested into a tile replacement project in vain if troubles are detected under the tile. Coating ceramic tile with paint also makes it possible for you to render a tailor-made look to your home and offers you lots of flexibility. It is always within your limits to alter the color or design of tiles by repainting in case you don’t adore their earlier appearance.
Cleanse your tiled surface in an exhaustive manner with your preferred brand name floor or cleansing agent. Under usual conditions, cleansers with abrasive materials would create scratches on your tiles and must be steered clear of. In this situation, an abrasive cleanser can, in fact, facilitate your task by roughening up the surface of your ceramic tile; as a result paint will hold it fast.
Decrease the glossiness and smooth surface of ceramic tile through vigorous rubbing with sandpapers. Sandpaper grains in the range of 200 are suitable for this activity. Rub tiny areas of tile manually or for a bigger task, bring an electric sander on rent from your nearby home enhancement shop. The sandpapered tile should give a scratchy look and feel. You can test its roughness by touching it when you are done.
The next job is to apply a priming coat to the ceramic tile before getting ready for painting. Primers with oil will normally adhere to the tiled surface comfortably. Make use of paintbrushes or rollers for priming. The size of these applicators is decided in terms of the size of your job and the place of the tile covering. You may feel the necessity to apply two layers of primer to make sure that the ceramic exterior is covered in an adequate manner.
Lightly rub the tile again with sandpaper after the primer has dried out. The drying out time is contingent upon the variety of primer you select, but can in any case run from a few hours to nightlong. Then, apply paint to the undercoated ceramic tile with the color of your preference. Oil or rubber-base paints glue properly to primed tile.
In the end, be certain to allow for sufficient supply of fresh air in the room where you are carrying out painting. This will protect you from inhaling injurious fumes. If you dwell in an undersized space with inadequate ventilation, seriously deliberate about spending a couple of nights with family or friends when the paint is getting dried up.